Tag: free autocad exercises

  • 20 Days of 2D AutoCAD exercises #20

    20 Days of 2D AutoCAD exercises #20

    Welcome to Day #20, the last day of this series of 2D exercises. It’s been good 20 days we have been working on 2D exercises using AutoCAD, and I can’t be more excited to have compiled this eBook for you, just to help you test what you have learned so far. I am disturbed by […]

  • 20 Days of 2D AutoCAD exercises #19

    20 Days of 2D AutoCAD exercises #19

    We are almost at the end of this series of AutoCAD learning exercises. Today, we have a tricky one, and I hope it is really tricky for you. The drawing below is to be replicated using AutoCAD or any other CAD software you may have at hand.   Complementary information. The head on the far […]

  • 20 Days of 2D AutoCAD exercises #18

    20 Days of 2D AutoCAD exercises #18

    Welcome to Day #18. Today’s AutoCAD exercise consists of the following. We have this simple figure to replicate given all dimensions. Complementary information Today’s exercise have been conceived with the aim to have you use  all what you have learned so far. But we will have to draw our first polygon today. The 6 point […]

  • 20 Days of 2D AutoCAD exercises #17

    20 Days of 2D AutoCAD exercises #17

    Welcome to 2D AutoCAD exercise Day #17. It’s been more than a couple of week we are learning 2D tricks on AutoCAD. Today’s exercise is the following. The image below serves as exercise for today. Hint Use the CIRCLE and LINE command to get the following objects. Clean it up using the TRIM command, you […]

  • 20 Days of 2D AutoCAD exercises #16

    20 Days of 2D AutoCAD exercises #16

    Today, we are going a little banana, but don’t be put off, if you were here since Day #1 you actually possess all the skill to come out of this exercise successfully. Here is a simple 2D exercise that I will want us to work on in today’s session. As an advice, you should always […]

  • 20 Days of 2D AutoCAD exercises #15

    20 Days of 2D AutoCAD exercises #15

    Welcome to today’s exercise. We are getting a little serious today. Today we have this “bent pipe joint” in 2D to draw as an exercise in AutoCAD. You can go ahead a use the HATCH command at the end of the design, nonetheless the more important in this exercise is to use a little bit […]

  • 20 Days of 2D AutoCAD exercises #14

    20 Days of 2D AutoCAD exercises #14

    today’s assignment is the following. We have the image down below to replicate using AutoCAD. You must have noticed the Dashed Thin Lines with Dots. We will not only be using continuous thin lines today, we will be using other types of lines as well. Today, we are going to learn how to create Layer […]

  • 20 Days of 2D AutoCAD exercises #13

    20 Days of 2D AutoCAD exercises #13

    As promised in the last 2D AutoCAD exercise, I’m bringing this exercise which is an easy one. But remember the objective of this is to master the MIRROR command. Here we go, all data you need to draw have been given. Hint All you need to draw are those 2 lines the dimensions are given. […]

  • 20 Days of 2D AutoCAD exercises #12

    20 Days of 2D AutoCAD exercises #12

    welcome to Day #12. Today, we will try to learn few new stuff. Here we have a simple 2D exercise. I believe you can have this exercise done with no hassle if you have been with me from Day #1. It is true that there are many way you can go and reach your goals […]

  • 20 Days of 2D AutoCAD exercises #11

    20 Days of 2D AutoCAD exercises #11

    Welcome to today’s play. Here is a simple figure that will serve us today. Again, we will be using tricks we have learned and leaning new tricks as well. I would love to show you the ARRAY command today. I will recommend you look at how to create ARRAYS in AutoCAD. Here, we will create […]

  • 20 Days of 2D AutoCAD exercises #10

    20 Days of 2D AutoCAD exercises #10

    We have reached Day #10, and it is time to bring something tricky to the table to challenge yourself. Here is today’s 2D exercise. As you can see, all members are neither vertically positioned nor horizontally positioned. All dimensions are vertical and horizontal. How do you think you can go about finishing this exercise? where […]

  • 20 Days of 2D AutoCAD exercises #9

    20 Days of 2D AutoCAD exercises #9

    Today’s 2D exercise combines all that we have learned so far in the previous AutoCAD exercises. But I would like us to experiment and learn about the ARC command today. Try to replicate the image below using AutoCAD with all the techniques you have learned so far. When you are done with the assignment, I […]

  • 20 Days of 2D AutoCAD exercises #8

    20 Days of 2D AutoCAD exercises #8

    Welcome to today’s AutoCAD 2D exercise. We have the image below to replicate, and luckily we are given all dimensions, which will make the task simpler. Today’s difficulty is simply to learn how to draw a circle with specified radius tangent to two objects. As you can see from the figure below, we need to […]

  • 20 Days of 2D AutoCAD exercises #7

    20 Days of 2D AutoCAD exercises #7

    Today’s exercise will help us utilize the HATCH command and understand it. One thing that is interesting about this exercise is the “angle game” this exercise will teach you. There is more than a couple of segments in the exercise that will make you use some techniques we learned in AutoCAD exercise Day #4, feel free […]

  • 20 Days of 2D AutoCAD exercises #6

    20 Days of 2D AutoCAD exercises #6

    Today we are going to learn how to use the CHAMFER command. This exercise can be done with everything you learned in the previous AutoCAD exercises, since Day #1. We will add the CHAMFER command as on of your skills today. The CHAMFER command helps us in getting from point A to B in the […]

  • 20 Days of 2D AutoCAD exercises #5

    20 Days of 2D AutoCAD exercises #5

    Today we will daw a rectangle with rounded corners and 9 circles, all in a way to replicate the figure below. On Day #2, we learned how to draw lines with precise directions and dimensions. Today, we will learn how to use the FILLET command. Step A Draw a rectangle of width 11.5 and height […]

  • 20 Days of 2D AutoCAD exercises #4

    20 Days of 2D AutoCAD exercises #4

    Welcome to Day #4 of this series of 2D AutoCAD exercises. We have a simple image to replicate using AutoCAD. All dimensions are given. If the drawing above is confusing, use the following one, where the image to draw is the one in the red color. If you followed since Day #1, You should have […]

  • 20 Days of 2D AutoCAD exercises #3

    20 Days of 2D AutoCAD exercises #3

    Welcome to Day #3 of this series of learning AutoCAD with exercises. Today, we have a but more complex exercise compared to the two previous ones. On Day #2, you learned how to draw lines with specific distances. In this exercise, all distances are given but remember that while drawing a circle in AutoCAD that […]

  • 20 Days of 2D AutoCAD exercises #1

    20 Days of 2D AutoCAD exercises #1

    Here is the first exercise of a series of 20 individual 2D exercises for AutoCAD. In this series, I will walk you through exercises with the aim of helping you learn how to draw in 2D using the software AutoCAD. The learning process will be simple. We start from the end, meaning we will set […]